
Epoxy primers
Yutep 857
High-solids epoxy primer for atmospheric and immersed marine protection systems.

Marine epoxy Singapore
UTOP Paints Singapore handles marine epoxy product enquiries, technical documents and regional support for newbuilding, drydock and maintenance projects.
Compare products, then confirm Singapore supply.比较产品,再确认新加坡供货。
Review product details, then ask our Singapore team to confirm stock, delivery and current technical documents.了解产品详情后,请向新加坡团队确认库存、交付和现行技术资料。

Epoxy primers
High-solids epoxy primer for atmospheric and immersed marine protection systems.


Epoxy intermediate and finishes
High-build recoatable epoxy for marine and industrial atmospheric protection.


Abrasion-resistant epoxy coatings
Glass-flake epoxy protection for marine areas exposed to abrasion and impact.


Surface-tolerant epoxy primers
Low-surface-preparation epoxy primer for external-hull maintenance.
Applications
Universal and maintenance primers for atmospheric and immersed marine environments.
Review Yutep 857 epoxy primer了解 Yutep 857 环氧底漆Compatible tie coats used between selected layers in marine coating systems.
Review Yutep 853 tie coat了解 Yutep 853 环氧连接漆Epoxy protection for external plating, topsides and superstructures.
Review external-hull maintenance了解外板维护配套Review preparation, application conditions and the vessel approval requirements for ballast tank work.
Review ballast-tank protection了解压载舱防护Compare Yutep 857 and Yutep 880 by cargo profile and surface condition.
Review cargo hold coatings了解货舱防护涂料Review the cargo list, cleaning exposure and curing window before selecting a lining.
Cargo tank lining selection →液货舱内涂层选型 →Review Yutep 876 for abrasion- and impact-exposed external hull areas.
Review Yutep 876 external hull protection了解 Yutep 876 船体外板防护Review Yutep 856 against the available surface preparation and service conditions.
Review Yutep 856 maintenance primer了解 Yutep 856 维护底漆A primer is one part of a coating system. Identify immersion or atmospheric exposure, achievable preparation and the retained coating, then confirm the compatible coats and current application requirements.底漆只是完整涂装配套的一部分。应先明确浸水或大气接触条件、可实现的表面处理和保留旧漆,再确认相容涂层及现行施工要求。
Yutep 857 technical data sheet · Chinese · V23-3 · PDF ↓Yutep 857 技术说明书 · 简体中文 · V23-3 · PDF ↓Singapore marine coating enquiry
Common questions常见问题
Compatibility depends on the existing coating, its adhesion and the repair system. Send the previous product name and photographs. Loose paint, contamination and damaged edges need preparation; a tie coat is not a substitute for sound underlying paint. Confirm compatibility before overcoating.需要看旧涂层类型、附着状态和修补配套。请提供原用产品名称与照片。松动漆膜、污染和受损边缘需要先处理;连接漆不能替代牢固的底层。复涂前应确认相容性。
The primer must suit both the achievable preparation and the service environment. Atmospheric deck repairs and immersed areas have different requirements. Share the tool method, remaining rust and existing coating with our team. Follow the selected product’s TDS; surface-tolerant does not mean preparation-free.底漆需要同时适合可达到的表面处理条件和使用环境。露天甲板修补与浸水部位的要求不同。请说明工具处理方式、剩余锈蚀和旧漆状态,并按所选产品的技术说明书施工;低表面处理涂料不代表无需处理。
Check the selected product and system for minimum and maximum overcoating intervals, and the separate curing requirement before immersion. These depend on conditions including steel temperature and film thickness. Touch-dry paint is not necessarily ready for immersion. Send the application conditions and launch date for review.应分别核对所选产品和配套的最短、最长复涂间隔,以及浸水前的固化要求。这些时间受钢板温度、膜厚等条件影响;表干不等于可以下水。请提供施工条件和下水日期供核对。
Epoxy primers and tie coats have different roles from an antifouling finish. For underwater hull work, confirm the existing coating, service conditions and complete compatible system before selecting products.环氧底漆、连接漆与防污面漆的作用不同。水下船体工程应先核对原有涂层、使用工况及完整的相容配套,再选择产品。