UTOP technical service specialists reviewing a vessel in dry dock

Marine coating systems

Marine coating systems by vessel area.

Explore coatings for underwater hulls, ballast tanks, cargo tanks, cargo holds and vessel maintenance.

01
Choose the area

Start with the part of the vessel and the work ahead.

02
Explore the coating products

See the primer, intermediate and functional coats for the selected area.

03
Confirm your coating system

Send vessel, condition and project details to UTOP technical service.

Vessel areas

Coatings by vessel area.

UTOP confirms the final system and current documents for each project.

01

Underwater hull / boot top

Underwater hull antifouling system

Anticorrosive protection, tie coats and antifouling selected for the vessel's trading pattern and docking plan.

NewbuildingDock repair
Information for your enquiry
  • Trading pattern
  • Activity and idle profile
  • Existing coating
  • Planned docking interval
Discuss this coating system →

Hull fouling control guide →船体防污选型指引 →

02

Above-water external hull / topsides

External hull maintenance system

Maintenance products selected for surface condition, retained coating and repair limits.

Dock repairOnboard maintenance
Information for your enquiry
  • Remaining coating condition
  • Surface preparation
  • Repair boundaries
  • Overcoating window
Discuss this coating system →

Onboard coating maintenance guide →船上涂料维护指引 →

03

Topsides / superstructure

Topsides and superstructure system

Atmospheric protection based on preparation, corrosion exposure, appearance and maintenance needs.

NewbuildingDock repairOnboard maintenance
Information for your enquiry
  • Atmospheric exposure
  • Surface condition
  • Colour and finish
  • Maintenance method
Discuss this coating system →

Plan atmospheric coating repairs →安排露天部位涂层修补 →

05

Ballast tanks

Ballast tank protection system

Tank protection based on condition, preparation access, application control and current approvals.

Confirm the exact product, coating system and current approval scope for the vessel. An epoxy product description alone does not establish compliance with a ballast-tank specification.应为具体船舶核对准确产品、配套与现行认可范围。仅凭环氧涂料的产品描述,不能认定满足压载舱规格书。

NewbuildingDock repair
Information for your enquiry
  • Tank condition
  • Preparation standard
  • Access and ventilation
  • Approval requirements
Discuss this coating system →

Request ballast-tank approval documents →申请压载舱用途认可资料 →

06

Cargo tanks

Cargo tank lining system

Define cargo service, cleaning regime and exposure before any lining recommendation is made.

NewbuildingDock repair
Information for your enquiry
  • Cargo list
  • Cleaning regime
  • Service temperature
  • Compatibility requirements
Discuss this coating system →

Cargo tank lining selection guide →液货舱内涂层选型指引 →

Working decks and exposed steel工作甲板与露天钢结构

Choosing deck paint for ships.船舶甲板涂料怎样选?

Define the deck exposure and repair conditions before choosing a primer and finish. Traffic, retained paint, cleaning and the working window affect the selection.先明确甲板接触条件与维修现状,再选择底漆和面漆。通行磨损、保留旧漆、清洗和施工窗口都会影响选型。

Identify the deck and exposure说明甲板部位与使用条件

Distinguish accessible atmospheric steelwork from immersed areas. State foot or equipment traffic, seawater splash, cleaning and any required slip resistance.区分露天钢结构与浸水部位,说明人员或设备通行、海水飞溅、清洗及所需防滑要求。

Review the coating roles核对涂层作用

Yutep 857 lists decks among its application areas and can be reviewed as a primer. Review Yutep 861 as an intermediate coating for atmospheric deck steelwork. Confirm the actual preparation and retained coating for each product.Yutep 857 的应用部位包括甲板,可作为底漆候选;Yutep 861 可按大气环境甲板钢结构的中间涂层核对。两者均需结合实际表面处理与保留旧漆确认。

Confirm the finish requirements确认完整面层配套

Specify the finish, any compatible non-slip treatment and return-to-service requirements for the job. Primer selection alone does not establish a deck finish or slip-resistance rating.按项目确定面层、相容的防滑处理及投入使用要求。选定底漆本身不等于确定甲板面层,也不能据此认定防滑等级。

Technical service FAQ

Coating system review.

Is this a coating specification?

These are reference coating combinations. UTOP confirms product compatibility, surface preparation, film thickness, application conditions and current documents for each vessel.

What should I provide for technical review?

Send the vessel type, coating area, existing condition, operating profile, planned preparation, location and work dates. Include the existing coating specification or product names if available.

Can I request TDS, SDS and certificates?

Yes. Use the technical library or the enquiry link on a product page, and include the destination market and required language.

How are Southeast Asia projects handled?

Contact UTOP Paints Singapore. The regional team coordinates commercial support, technical service and supply for each project.

Ready for technical review?

Tell us about your vessel and coating work.

Start a system enquiry