Industrial protective coatings工业防护涂料

Industrial paint for steel and equipment.工业钢结构与设备防护涂料。

UTOP manufactures protective coatings in China. Our Singapore team handles industrial coating enquiries and regional project coordination.鱼童在中国制造防护涂料,新加坡团队负责工业涂料咨询及区域项目对接。

Check industrial stock and delivery确认工业涂料库存与交付 →
Industrial protective coatings — Application illustration: Bridges
Application illustrationBridges

Industrial coating products工业防护涂料产品

Choose products by coating role.按涂层作用选择产品。

Ask our technical team to confirm the primer, intermediate and finish for your substrate, exposure and application conditions.请结合底材、暴露环境与施工条件,由技术团队确认底漆、中间漆和面漆配套。

Epoxy protective coating环氧防护涂料

An epoxy option for atmospheric protection.用于大气环境防护的环氧涂料。

For industrial steelwork and equipment, review the product, coating system and application conditions together.为工业钢结构与设备选型时,需同时核对产品、涂层配套及施工条件。

High-build epoxy厚膜环氧漆

Yutep 861

A two-component, high-build epoxy intermediate or finish for steel and concrete exposed to land or marine atmospheres.双组分厚膜环氧中间漆或面漆,用于陆地或海洋大气环境下的钢材与混凝土防护。

Coating role涂层作用
Intermediate / finish中间漆/面漆
Substrates底材
Steel and concrete钢材、混凝土
Service environment使用环境
Atmospheric exposure大气暴露环境

Confirm the primer, finish requirements and current TDS for your project. Atmospheric use does not establish suitability for immersion, tank lining or chemical contact.项目选型前请确认底漆配套、面漆要求及现行技术说明书。大气防护用途不代表适用于浸泡、储罐内衬或化学介质接触。

Enquire about this product咨询这款产品View Yutep 861查看 Yutep 861

Coating systems涂层配套

Choose the full coating system.按完整涂层配套选型。

An industrial paint specification may use a primer, intermediate and finish. Product compatibility and service conditions determine which layers are needed.工业涂装规格可包含底漆、中间漆及面漆,具体层次需根据产品相容性与使用工况确定。

Primer底漆

Match the primer to the substrate, surface preparation and exposure. Check adhesion and compatibility with any coating that will remain.按底材、表面处理条件及使用环境选择底漆;保留旧涂层时,需核对附着力与相容性。

Intermediate coat中间漆

Build the specified protective film with a compatible intermediate coat. The full system determines the required dry-film thickness and overcoating intervals.通过相容的中间漆达到规定防护膜厚,干膜厚度及复涂间隔需按完整配套确认。

Finish coat面漆

Consider weather exposure, appearance, cleaning and maintenance. Confirm the finish against the project specification rather than choosing by colour alone.结合日晒雨淋、外观、清洁和维护要求确认面漆,选型不应只看颜色。

Project enquiry项目咨询

Prepare your industrial paint enquiry.准备工业涂料询价资料。

Share the information you have and identify any estimates. The Singapore team coordinates product, technical-document and supply enquiries with our teams in China.请提供已有资料,并注明估算信息。新加坡团队与中国团队沟通,协调产品、技术文件及供货咨询。

What to include需要提供的信息

Asset and application设施与应用
Structure or equipment type, project location and the area to be coated.结构或设备类型、项目地点及需要涂装的部位。
Exposure and operating conditions暴露环境与使用工况
Indoor or outdoor service, salt, moisture, UV, and any chemical or temperature requirements.室内或室外、盐雾、湿气、日晒,以及化学介质或温度要求。
Substrate and existing coating底材与现有涂层
Substrate, coating condition and the surface preparation achievable on site.底材、现有涂层状态及现场能够达到的表面处理条件。
Specification and documents项目规格与资料
Existing approved specification or product references, if available.如有已批准的涂装规格或产品资料,请一并说明。
Quantity and delivery数量与交付
Estimated coating area or required quantity, with the delivery location.预计涂装面积或所需数量,以及交付地点。
Work dates施工时间
Application or maintenance window and the required delivery date.可用的施工或检修时间,以及要求的交付日期。
Request an industrial paint quotation咨询工业涂料报价

Project questions项目常见问题

Before specifying a coating.选定涂层前。

Send your required quantity, delivery location and date. Our Singapore team will confirm the product, documents, availability and supply schedule for your industrial project.请提供所需数量、交付地点与日期,由新加坡团队核对工业项目适用产品、技术资料、供货情况及交付安排。

Contact our Singapore team联系新加坡团队
How do I choose an industrial epoxy primer?工业环氧底漆怎么选?

Start with the steel condition and the surface preparation you can achieve. Then check the exposure, compatible topcoat and application conditions against the current technical data sheet. A primer for atmospheric steelwork is not automatically suitable for immersion or chemical service.先确认钢材状态及能够达到的表面处理条件,再按现行技术说明书核对使用环境、配套面漆与施工条件。适用于大气环境钢结构的底漆,不一定适用于浸泡或化学介质环境。

Can an anti-corrosion coating be applied over existing paint?防腐涂料能直接涂在旧漆上吗?

The existing coating must be identified and checked for adhesion, damage and contamination. Loose coating and corrosion need preparation; compatibility and any test patch should be agreed before repainting. Send photographs and the previous coating specification if available.需先识别旧涂层,检查附着力、损坏及污染情况。松动涂层与锈蚀部位应处理,复涂前确认相容性及是否需要试涂。询盘时可附现场照片及已有涂层规格。

What do you need for a protective-coating quotation in Singapore?向新加坡团队询价,需要提供什么?

Send the structure or equipment type, location, approximate coating area and service conditions. Include the existing specification, preparation method and work dates if available. Our Singapore team works with UTOP’s manufacturing and technical teams in China to confirm the coating system, documents and supply schedule.请提供结构或设备类型、地点、大致涂装面积及使用工况。如有现有涂装规格、表面处理方式和施工时间,也请一并提供。新加坡团队与中国工厂及技术团队沟通,确认涂层配套、技术文件与供货安排。